Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 09:01:23 am
Home Help Search Login Register

Ottawa Fiero Club Forum  |  General  |  Project Work Logs  |  Topic: Thinking Northstar Conversion? « previous next »
Pages: 1 ... 10 11 [12] 13 14 ... 19 Go Down Print
Author Topic: Thinking Northstar Conversion?  (Read 99612 times)
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #165 on: January 21, 2005, 01:07:34 pm »

You keep asking me that, but I really don't know because I still haven't taken it to the scales.  I have calculated the weight to be around 2750 without driver, but I don't know for sure yet.

Aaron

.
Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
GSXRBOBBY
Guest
« Reply #166 on: January 21, 2005, 01:23:19 pm »

I have the Spec Aluminum Flywheel and the spec Stage 3 clutch. The swap is all done , just need the suspension on. I beleive I am the first to use the Spec flywheel on a northstar thus far... The flywheel is really nice , but pricey @ $400 + shipping Plus Brokerage fees. IT was close to $1000 for the Combo clutch and flywheel.

Sorry Aaron my last question was for him.
How is the Spec flywheel working out with the stage 3 clutch?
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #167 on: January 21, 2005, 04:51:15 pm »

He'll know in March.
Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
GSXRBOBBY
Guest
« Reply #168 on: January 24, 2005, 01:31:20 am »

I though he said he was driving it???
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #169 on: January 24, 2005, 11:35:17 am »

The motor is running and he probably has the suspension together by now but, the weather here is nothing to be driving in yet.
Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
Slammed Fiero
Guest
« Reply #170 on: January 24, 2005, 04:10:39 pm »

just finished the exhaust , all 2.5" mandrel bent tubing and Dynomax UltraFlow Bullet mufflers.. I got the coilovers this morning... Should be driving the car in 4 weeks.

JM
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #171 on: February 17, 2005, 07:40:27 pm »

The following are some good maps to start with (Holley Commander 950).

I will be modifying / updating some of the maps so check for updates

First: Engine Paramiters

« Last Edit: June 22, 2006, 07:04:32 pm by aaron88 » Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #172 on: February 17, 2005, 07:42:05 pm »

Fuel Modifiers

« Last Edit: June 22, 2006, 07:05:13 pm by aaron88 » Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #173 on: February 17, 2005, 07:44:16 pm »

Acceleration Enrichment

Check for updates in the spring on the "Rate of change of MAP Sensor"

« Last Edit: June 22, 2006, 07:05:39 pm by aaron88 » Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #174 on: February 17, 2005, 07:45:52 pm »

Startup Enrichment vs. Engine Temperature

« Last Edit: June 22, 2006, 07:06:04 pm by aaron88 » Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #175 on: February 17, 2005, 07:53:36 pm »

Fuel Map

This map should be rich.  The red indicates a pulsewidth that is a little too long.  For best results, use a wideband O2 sensor to get the air-fuel ratio around 12.6:1 (O2 Lambda .8 +) in the upper region.

« Last Edit: June 22, 2006, 07:06:28 pm by aaron88 » Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #176 on: February 17, 2005, 07:56:54 pm »

Spark Map

This map should be fine with 91 octane fuel.  I’ve been running up to 35° but I can’t recommend that to others until I have my knock sensor working and posted.

« Last Edit: June 22, 2006, 07:07:13 pm by aaron88 » Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #177 on: February 17, 2005, 07:59:12 pm »

Closed Loop Paramiters

I'm still working on "seconds between O2 compensation step changes".  Trying to dial it in better.

« Last Edit: June 22, 2006, 07:07:35 pm by aaron88 » Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #178 on: February 17, 2005, 08:00:10 pm »

Idle Air Control

« Last Edit: June 22, 2006, 07:08:10 pm by aaron88 » Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
Slammed Fiero
Guest
« Reply #179 on: February 19, 2005, 09:44:04 am »

this is beautiful , and perfect timing too. I will be drivingthe car for the first time monday.

All thats left is the shift cables and 1/2 of the exhaust.

Ohhhhh Baby!!!

thanks again!
Logged
Pages: 1 ... 10 11 [12] 13 14 ... 19 Go Up Print 
Ottawa Fiero Club Forum  |  General  |  Project Work Logs  |  Topic: Thinking Northstar Conversion? « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!