Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 01:43:35 pm
Home Help Search Login Register

Ottawa Fiero Club Forum  |  General  |  Mods  |  Topic: need advice « previous next »
Pages: [1] Go Down Print
Author Topic: need advice  (Read 4162 times)
grandam455
Fiero Owner
**
Offline Offline

Posts: 55



« on: May 28, 2012, 11:43:11 pm »

I have a chance to get a front nose from a 85gt will this fit on the 84 notchie,also the rear bumper and the rear truck lid work? Thanks Tom
Logged
Dan
Fiero Know-it-all
***
Offline Offline

Posts: 216


« Reply #1 on: May 29, 2012, 08:15:43 am »

Only difference is the grate on the trunk lid and make sure you get the plastic pieces from under the bumpers so they bolt up straight. Dan
Logged
grandam455
Fiero Owner
**
Offline Offline

Posts: 55



« Reply #2 on: May 29, 2012, 06:59:54 pm »

Thanks Dan I was also given working headlight motors, also gas tank and pump and coolant tubes,and calipers,they are the same? Thanks Tom
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #3 on: May 30, 2012, 12:06:48 am »

All the same except I'm not sure about the headlight motors, but even if they are different they should still work (ie: bolt right in).

It's very important that you get all the underling plastic pieces that locate the outer panels for the body swap.


.
Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
grandam455
Fiero Owner
**
Offline Offline

Posts: 55



« Reply #4 on: May 30, 2012, 08:40:32 pm »

Thanks for the advice was not sure if they would interchange but i do like the G.T. front and rear fascia. There is a trans. out of the car will it work to, it was from a 2.8 and i have the 2.5 Sorry about all the Question but he calls everyday telling of parts he found in his barn and i'am not a expert, Again thanks guys for your advice
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #5 on: May 30, 2012, 10:38:10 pm »

Auto or manual?
Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
grandam455
Fiero Owner
**
Offline Offline

Posts: 55



« Reply #6 on: May 30, 2012, 11:55:39 pm »

It is a auto.
Logged
Dan
Fiero Know-it-all
***
Offline Offline

Posts: 216


« Reply #7 on: May 31, 2012, 07:25:30 am »

2.5 and 2.8 used the same auto tranny so it will work fine. Dan
Logged
grandam455
Fiero Owner
**
Offline Offline

Posts: 55



« Reply #8 on: May 31, 2012, 08:47:38 pm »

Thanks Dan,My reverse is slipping alot thats why i needed to know.
Logged
Pages: [1] Go Up Print 
Ottawa Fiero Club Forum  |  General  |  Mods  |  Topic: need advice « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!