any interest in 88 cradle or front end?

[fiero308]

I MIGHT have access to an 88 cradle and/or front end assy's.  I am not sure if I want to get into swapping them into my 85 or not simply because of the amount of work I have put into my car so far altho I might go with the cradle.  The front end would be the cross member, the hub ass'ys, the rack (if necessary but prob a good idea to match the rest) and the upper and lower control arms. 

Any interest?  The stuff isn't dirt cheap to me but I would just pass it along to someone who would use it.  I am 'guessing' the cradle will be in the $350 range with all that stuff on it, but the 'owner' is being tight lipped about price so usually that isn't a good sign.

I have no idea what they might ask for the front assy but they said they would look at it and get back to me. 
I have to decide what I am going to do too, here.  To help me with my decision, can anyone post a pic or pix of the 88 spindle assy hopefully showing a bare spindle and the bearing separately?
TIA!!!

[Sentinel]

i assume if it's clean Nick might be interested.

[fiero308]

well, there may be a very short line-up already.  I have almost had the rear cradle 'forced' on me and I am pretty sure I am NOT going to use it now. 
The front assy is up in the air but I will see what he wants for it and go from there.  So NICK, if you are reading this let me know.
thx
gp

[Gizmo]

If I'd have an 88 I would probably scoop that stuff up, as backup parts.  But right now I'm more after a clean rolling chassis.  Can't see myself swapping the 88 "stuff" to an earlier frame....but thats a fun project!

[fiero308]

ok
I think these things are available to the first person who wants them.
LMK and I can put you in touch with the guy.  The ONLY thing I know about price is that he told me he wanted $200 for the cradle, and his idea of cradle was a bit more 'bare' than mine........
So I am guessing $300?  maybe a bit more with the hub ass'ys and the trailing arms (for lack of a better term).

gp

[2ML67]

Should ask Brian as his cradle is not in the best of shape. Dan

[GoFast85]

If it is better shape than mine, I would be interested?

[fiero308]

hi Brian
I don't have it and don't expect I will get it but if you are interested I can point you in the right direction.  I have no idea what shape it is in except they said it looked 'fine'.

[fiero308]

the front end of this car is probably still avail (AFAIK) and since they report it was hit in the back end hopefully it is in decent shape?