Welcome, Guest. Please login or register.
Did you miss your activation email?
May 05, 2025, 12:49:44 pm
Home Help Search Login Register

Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: HELP, Vac. Line « previous next »
Pages: [1] Go Down Print
Author Topic: HELP, Vac. Line  (Read 2354 times)
Rob
Guest
« on: July 21, 2004, 08:42:52 pm »

Hey

It would seem that i have lost my vacume line that goes to my fuel pressure regulator.. How I lost It I have no clue as every thing else seems to be in order, just need the vac line to button it up and start er up again. I have some vacume lines from my 2.5l ones even long enough, but has the wrong end on it, so If I was to get some sort of connector  from canadian tire do you think it will work? are all vac lines essentialy the same.. Im sure it would probley work, I just dont know if the diameter of the line makes a lot of difference...

Thanks; Rob
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #1 on: July 26, 2004, 12:18:25 pm »

Did someone say vacuum lines, I know what you could do with those.  Can anyone say clean carpets.

I’m just kidding.  Basically the vacuum line diameter is just a guideline.  There should be no problem using a connector.

Aaron

.
Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
2ML67
Guest
« Reply #2 on: July 26, 2004, 07:11:51 pm »

I have a stripped top end off a Fiero 2.8 in a box, your welcome to come see if it still has what you need. Dan
Logged
Rob
Guest
« Reply #3 on: July 27, 2004, 08:54:53 pm »

Thanks guys, I did figure out that I hadent lost it, I just didnt realize that it was still attached.

Later; Rob
Logged
Pages: [1] Go Up Print 
Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: HELP, Vac. Line « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!