|
1
on: September 19, 2017, 06:16:29 pm
|
|
Started by jjd2296 - Last post by aaron88
|
|
Ya, cool. Nice guy.
Aaron
.
|
|
|
2
on: September 19, 2017, 06:15:29 pm
|
|
Started by FIERO-JOE - Last post by aaron88
|
|
If you don't have any leaks then it seems like air in the system to me. Or it's possible you have the wrong slave (too large) or the wrong slave master (too small).
Only real possibilities.
Aaron
.
|
|
|
3
on: September 18, 2017, 08:36:34 am
|
|
Started by FIERO-JOE - Last post by FIERO-JOE
|
|
hey all ok now the next issue.. I bought and installed a new clutch slave think I bleed the lines and that its working ok.. BUT still no clutch disengaging the pedal goes to the floor with little to no resistance.. the slave moves but not very far... maybe a inch total movement..
I never really looked to see how far everything moves when is was working so I have no clue as to the correct movement..
other then dropping the engine and pulling the tranny apart is there a way to test if its just air in the line or if its the clutch mechanics that is broken,,
thanks all..
|
|
|
4
on: September 17, 2017, 01:26:52 pm
|
|
Started by jjd2296 - Last post by jjd2296
|
|
Got lucky the guys is going to meet me with them!!
|
|
|
5
on: September 17, 2017, 08:47:25 am
|
|
Started by jjd2296 - Last post by jjd2296
|
|
There's a guy that has a set of tan seats that he said I could have but he's in Kingston and I'm in Toronto! He needs them gone within the next 2 days. Anyone in that area that could pick them up for me and pull the skins off and ship them to me. I'll pay for shipping and your time just let me know what you want. You can keep the seat frames if you need them. Or just store them for me till I can get out your way and I'll pay you for helping me out
|
|
|
6
on: September 17, 2017, 08:32:01 am
|
|
Started by jjd2296 - Last post by FIERO-JOE
|
|
Sent u email
|
|
|
7
on: September 13, 2017, 12:55:27 pm
|
|
Started by jjd2296 - Last post by jjd2296
|
|
Ok can you email me some pic?? ill send you a message with my email
|
|
|
8
on: September 13, 2017, 08:30:38 am
|
|
Started by Pomf=3 - Last post by FIERO-JOE
|
|
hey I was in cornwall and Kenny u-pull and they have a 1084 fiero bumper still in tact and in ok shape.,. paint bad but body good..
|
|
|
9
on: September 13, 2017, 08:26:41 am
|
|
Started by jjd2296 - Last post by FIERO-JOE
|
|
i have a few and work great...
I think defrost..
lights
|
|
|
10
on: September 11, 2017, 09:08:15 pm
|
|
Started by dguy - Last post by can machine
|
|
You can buy brand new ones for $160 on Home Depot's website. But I have heard the 110v ones are not very good. Not enough juice. I'm looking into getting a 220v mig since I have 220v in my garage.
|
|
|
