96 Olds LSS 3800SC

[2ML67]

Found another 3800SC at the wreckers it is still in the car and runs nice. Not sure of the milage but it is probably high, but taking into consideration he only wants $500 it may be a good deal. Dan

[Rob]

hmm could always use a spare for a build up....

[FieroBUZZ]

Series !....is it not?   

[2ML67]

No its definetely series II but has the 4T60E tranny bolted to it. 96's were the oddball year cars. Yes Rob I was thinking the same thing would make for a nice engine to do a supoer build on instead of taking apart the nice 2003 engine I have in my Fiero know. If you want to see it it is at Harrison's down near Wapoose or however yopu spell it. Dan

[dguy]

No its definetely series II but has the 4T60E tranny bolted to it. 96's were the oddball year cars. Yes Rob I was thinking the same thing would make for a nice engine to do a supoer build on instead of taking apart the nice 2003 engine I have in my Fiero know.

The angle on my right says "you didn't read that", but the devil on the left's voice is louder. 

Any idea whether or not that wrecker would be friendly to leaving the transmission behind, but surrender the engine-side harness instead?

[Kitten]

Don... kick the angel out the window!!!  The little demons more fun anyway.   

[2ML67]

he is a very decent guy so should be no problem buying just the engine with its harness still attached. He is open till 4pm on Saturdays if you want to come down I will take you over so you can hear it running. Dan

[dguy]

Took a look at it yesterday, and I dare say that's one of the cleanest, quietest 300,000+ km cars I've ever seen.

...and its engine now has a new owner, and will have a new home early next week.  Thanks for all your help, Dan!   

[FieroBUZZ]

Nice one guys! 

Now all you need to do is put it in your car and beat me.......  rofl 

[2ML67]

Went and removed the harness today so they can pull the engine. Should have the engine home tomorrow and tucked away nice and safe for you. Did you want any thing done with the harness while it is here. Dan

[dguy]

Did you want any thing done with the harness while it is here.

No thanks.  You've done plenty already.   

[2ML67]

Don she be here all nice and snug in the corner covered up real nice with plastic. Nick I was already asking him about the tranny as I was thinking of getting it but I still have the 4T60E out of my van laying around so I really do not need another. I didn't actually get a price but can ask him if you like. Dan

[dguy]

Don she be here all nice and snug in the corner covered up real nice with plastic.

Beauty.  Thanks Dan.   

[FieroBUZZ]

Don she be here all nice and snug in the corner covered up real nice with plastic.

Beauty.  Thanks Dan.   

That's what he said about mine and then he made a hole in it....      

[dguy]

We hope to have a trailer hitch installed on the Beetle in time for the next GTG, Dan.  If you can stand having some german engineering in your driveway again, we should be able to bring my new toy home then.