Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 09:40:56 pm
Home Help Search Login Register

Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: F.S. 3.5L DOHC Shortstar engine. « previous next »
Pages: [1] Go Down Print
Author Topic: F.S. 3.5L DOHC Shortstar engine.  (Read 3322 times)
Joe Fieroshop
Guest
« on: January 10, 2005, 10:37:36 am »

I have a 3.5L Shortstar engine that I'm selling. Origanally this motor was going to be installed into the car known as DEVLISH. Since then a change of plans and I came accross a 3800 N/A motor that will be Turbochagred and intercooled that will be going into it now.

This motor will come with some spair parts too, I don't have a starter or Alternator, sorry.

Just let me know if there are anyone is interested.

Thanks
Joe
Logged
fiero308
Guest
« Reply #1 on: January 10, 2005, 11:18:07 am »

I'm not sure how much people are UP on this engine, Joe; or maybe it is just me.

But perhaps you could plug in some info on it or a link?

  I THINK it is a brand new engine; dohc; not even sure if it is a 60*V6 or not; all alum?  It will bolt up to ie a 282 etc?  Stock hp and torque figures?  Redline is what?  Sequential FI?  what years did it come in; does it come with ecm; wiring harness etc etc?
Any idea what is involved in chip reprogramming or if it is even possible?
I am sure that there is very little aftermarket stuff for it if it is quite new.  Mileage?

And I guess what you are asking for it......... Shocked

all would help I think.
gp
Logged
Rob
Guest
« Reply #2 on: January 11, 2005, 09:49:51 pm »

these engines are essentialy a northstar engine with 2  cylinders loped off. would make a nice high reving engine, and installed they look like they belong! good luck on the sale
Logged
Joe Fieroshop
Guest
« Reply #3 on: January 12, 2005, 10:58:45 am »

Rob is correct. this 3.5L is the smaller brother of the N*, it is a 90 deg. V6, it will mount to a 282 tranny, it's an all alluminum motor that has 4 cams. If I'm correct on my numbers, the HP out put is 215-220 HP. The engine has a harness but no ECM. I do have a way to wire this up without using the original Olds, PCM. I did some searching, some comparisson and found an easy ECM that can be wired up, and programmed to run this engine.

If anyone is serious you can send me an e-mail.

Joe
Logged
Ronjh12
Fiero Beginner
*
Offline Offline

Posts: 1


« Reply #4 on: November 05, 2017, 06:29:13 pm »

TOTAL long shot ------------- but would this engine still be for sale HuhHuhHuh
Logged
jjd2296
Fiero Beginner
*
Offline Offline

Posts: 23


« Reply #5 on: November 27, 2017, 04:21:11 pm »

I have a 4.3 with 5 speed tranny on cradle and with wiring harness and ecm?? set up for a turbo as well
Logged
Pages: [1] Go Up Print 
Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: F.S. 3.5L DOHC Shortstar engine. « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!