needed ASAP!

[FieroDough]

Lowering spreings for my GT (86)

Complete poly bushing set, all but the cradle (already took care of that)

need a new isuzu tranny. (no, it's not broke, but i want a second one!)

Shift cables, 85+ isuzu 5spd

master and slave cyl.

Clutch hose from front to back, in good shape!

and.. that's about it for now.

Cheers!

[GoFast85]

isuzu at:

 http://www.fiero.nl/forum/Forum4/HTML/018332.html

[FieroDough]

Portland, Or is a littel far.

[cowans]

Eric, contact 'REBEL' as told to me by Gary... he has one.
Rebel (Marcel) has an 85 parter with an Isuzu.  I don't know what it's like or what his plans for it are......  His tel#= work 613-257-7551
or fax  613-257-7552
Sandy
or you could try Conroy's on 10th line. I picked up an 89 Cavalier Isuzu for $50. He's apparently closed for winter, but, if you leave a note at the door, they will supposively call you back. With a Cavalier you just switch out the top plate(4 bolts) and add the Fiero cable bracket! I would change the seals at the same time, and make sure you replace then with needle bearing seals!
Sandy
Oh! I have a spare master and slave....$25. each!

[a.k.a]

f.y.i ( and in lieu of a pm ) I can get eibach's ( i think it's a .8 inch drop...) for the 84-87 boys for around 350 and intrax for slightly more

the price can be less if you want to make up a group buy!