Welcome, Guest. Please login or register.
Did you miss your activation email?
May 01, 2025, 07:58:03 pm
Home Help Search Login Register

Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: Selling Parts « previous next »
Pages: [1] Go Down Print
Author Topic: Selling Parts  (Read 2257 times)
dimeadozen
Fiero Know-it-all
***
Offline Offline

Posts: 169


Mia: March 17, 2010- The Safety


« on: May 07, 2010, 12:25:38 am »

I live in Ottawa, in Orleans

I have in my possession some parts I am selling.

I have 2 Pairs of 84 - 86 headlight motors ( the whole light harness wires, lamp and mechanism)

I have a mint condition Windshield wiper motor

I have a mint condition windshield washer container with the sprayer motor and hose (outside of sprayer is a bit rusty but it works)

I have some extra SE side marker lights

I have two grey wall pillars (the ones at the seats, and it looks like they had some custom speaker holes cut into them near the floor, but they are not damaged otherwise)

I have a ( I believe) the fan adjust relay for the adjustable cooling switch.

I have two rear 88 GT spoilers. ( one is sagged, the other one is mint) Both are not damaged otherwise, and are painted.

I have an extra set of 87- 88 GT Tail lights ( The lenses were removed from them and they were finished as pop outs. Note : I might keep them and give away my other good tail lights which, other than the inner glue stain at the top of each one, are in very good condition.

I have a pair of trunk Torsion Bars in perfect condition - I bought them to put them in a car, and decided not to.

I have an 87 GT front and rear bumper. The front bumper is slightly damaged but I fixed it, and the rear bumper is slightly warped on one side, but is otherwise in good condition and would not be noticed to the untrained eye.

I have a couple extra rear view mirrors from cars I parted. They are not cracked or damaged.


I'm not looking to get rich, so if you are interested, I can send you some pics and if you make a decent offer I'll be glad to arrange a meeting.

I am also willing to trade parts, for example, I need a set of 87  headlights. I will post another message with further items I am looking for.

I hope to attend the Meet in May and can bring my stuff with me. If you wish to contact me, you can message me and I can give you a number to reach me at.

Thank you.





Logged

If I just spend a little more money...
dimeadozen
Fiero Know-it-all
***
Offline Offline

Posts: 169


Mia: March 17, 2010- The Safety


« Reply #1 on: May 08, 2010, 01:42:44 pm »

Here are some pics of some of the parts I am selling. I will post more later
« Last Edit: May 08, 2010, 08:49:34 pm by dguy » Logged

If I just spend a little more money...
dguy
Global Moderator
OFC Post-a-holic
*****
Offline Offline

Posts: 2598


Got vacuum. Want boost.


« Reply #2 on: May 08, 2010, 08:52:29 pm »

I took the liberty of re-sizing your photos... hope you don't mind.  Each one was almost 1MB in size, and we have a few rural users who are on dial-up.
Logged

1984: Track car project.
1985 SE: Dead 2.8, stalled L67 swap.
FIERO-JOE
Fiero Know-it-all
***
Offline Offline

Posts: 125


30 years old!!


« Reply #3 on: May 08, 2010, 09:02:53 pm »

how much do you want for the headlight motor passenger side.. ??
thanks..
joe Cheesy
Logged

Should there be this many extra screws?
grandam455
Fiero Owner
**
Offline Offline

Posts: 55



« Reply #4 on: May 09, 2010, 10:19:45 am »

Thanks dguy 1mb is almost 30 min. to download pictures, but this morning it's working at 5kb/sec thats double the normal speed, jeez almost hi-speed
Logged
dimeadozen
Fiero Know-it-all
***
Offline Offline

Posts: 169


Mia: March 17, 2010- The Safety


« Reply #5 on: May 09, 2010, 07:57:57 pm »

Thanks I would have done it myself I don't know ne thing about photoshop. Tongue
Logged

If I just spend a little more money...
Pages: [1] Go Up Print 
Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: Selling Parts « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!