Ottawa Fiero Club Forum

Buy/Sell/Trade => Parts => Topic started by: dguy on June 24, 2016, 06:11:40 pm



Title: 85 GT - free pickings
Post by: dguy on June 24, 2016, 06:11:40 pm
Silver 85 GT, 2.8, 4-speed.  

See something you want, come over, pull it, take it away.  Absolutely free.  No trailer access so you can't take the whole thing away unless you plan on cutting & carrying.

BYOT - Bring Your Own Tools.  I can provide electricity and/or compressed air with 1/4" fittings, and a cherry picker if necessary.  No other tools are available, no exceptions.

Located near Carleton Place.  PM for address & availability.


Title: Re: 85 GT - free pickings
Post by: dguy on June 24, 2016, 06:14:32 pm
More photos


Title: Re: 85 GT - free pickings
Post by: can machine on June 26, 2016, 04:58:24 pm
Hows the headliner and the trim piece around the shifter? Ashtray doors still intact?


Title: Re: 85 GT - free pickings
Post by: dguy on June 27, 2016, 07:24:53 am
Hows the headliner and the trim piece around the shifter? Ashtray doors still intact?

I'll take a few photos the next time it's sunny out and post them for you.


Title: Re: 85 GT - free pickings
Post by: dguy on June 27, 2016, 05:04:57 pm
Hows the headliner and the trim piece around the shifter? Ashtray doors still intact?

I'll take a few photos the next time it's sunny out and post them for you.

The headliner fabric is rough, but by feel the board appears to be intact if you're interested in a re-covering project.  The shifter surround is decent.  Pics below...


Title: Re: 85 GT - free pickings
Post by: can machine on June 28, 2016, 08:44:19 pm
PM sent


Title: Re: 85 GT - free pickings
Post by: can machine on July 10, 2016, 09:48:04 pm
Thanks again for the parts!  O0


Title: Re: 85 GT - free pickings
Post by: Chris on July 21, 2016, 02:39:33 pm
More photos
Hi,
Do you know what shape the engine cradle is in?
Thanks
  Chris


Title: Re: 85 GT - free pickings
Post by: dguy on July 21, 2016, 02:42:03 pm
Do you know what shape the engine cradle is in?

The cradle is rotten and irreparable.


Title: Re: 85 GT - free pickings
Post by: blue41 on October 20, 2016, 01:17:39 am
I wound like to know it the doors and transmission are still there.


Title: Re: 85 GT - free pickings
Post by: dguy on October 20, 2016, 05:27:22 am
I wound like to know it the doors and transmission are still there.

The transaxle, yes.

The doors no longer have any mirrors, and the upholstery and arm rests are gone.  The right side door skin is partially torn away.  The left side door has had a couple of pieces of its structure cut out.


Title: Re: 85 GT - free pickings
Post by: dguy on October 20, 2016, 05:34:13 am
Updated photos of what's currently remaining.

Non-metallic items are slowly being removed and disposed of over the next few weekends.  The remains of the frame and drive train will be dismantled and hauled away for recycling some time after that.


Title: Re: 85 GT - free pickings
Post by: Skid on November 12, 2016, 06:05:54 am
 Hello
 Just bought a 1984 and have never owned a Fiero before so this is all new to me. Mine is missing some trim pieces on the front fenders R/L and yours look to still be there. Not sure what it takes to remove these but I'm willing to give it a shot. How do I reach you and what's best time wise for you ???
 Thanks
 NewBee


Title: Re: 85 GT - free pickings
Post by: dguy on November 12, 2016, 06:51:16 am
Mine is missing some trim pieces on the front fenders R/L and yours look to still be there.

At this point all non-metallic items other than the rear glass have been disposed of.  Once I get some new flashback arrestors for my torch what remains the chassis will get cut up and hauled away.


Title: Re: 85 GT - free pickings
Post by: Dan on November 12, 2016, 03:39:28 pm
would appreciate if you could hold on to the C500, C100 and C203 connectors with lots of wire left. 


Title: Re: 85 GT - free pickings
Post by: dguy on November 13, 2016, 01:25:51 pm
would appreciate if you could hold on to the C500, C100 and C203 connectors with lots of wire left. 

All yours.  The interior side of C100 was cut-off short, but there should be enough there for solder & heat shrink.  C500, C203, and the front compartment side of C100 all came away with good lengths on them.

I can run them out later in the winter with the rest of the L67 build parts, or box them up and mail them relatively quickly.  Take your pick.


Title: Re: 85 GT - free pickings
Post by: Dan on November 13, 2016, 08:52:11 pm
Thanks Don and no hurry just didn't want them being tossed out