|
Title: Brake line size Post by: fiero_fighter on April 15, 2011, 10:53:18 am From the proportioning valve to the rear distribution block what's the line size?
Title: Re: Brake line size Post by: can machine on April 15, 2011, 09:28:34 pm I measured mine. It looks like 1/4 to me.
Title: Re: Brake line size Post by: aaron88 on April 15, 2011, 10:36:38 pm That's right...1/4"
Title: Re: Brake line size Post by: fiero_fighter on April 15, 2011, 11:25:58 pm yep checked it tonight, 1/4"... next project, as the brakes are already apart... line lock. my mechanic buddy is laughing at me but... the plan is to install a manual line lock. I come from a recent 4x4 back ground(97 5.9 gas ram with 8" lift, custom 200lbs bumper with 12000lb winch etc..), so a manual line lock represents a much lower failure rate than electronic... picked up a 6000 psi valve today from one of my suppliers, so I'll be plumbing it in this weekend. I'll try to post full pics of the upgrades.
Title: Re: Brake line size Post by: aaron88 on April 17, 2011, 03:58:57 pm After they split they are 3/16, but you can use 3/16 all the way back if you want. It's not a high volume system.
|