Title: LF: trunk rack screws Post by: FIERO-JOE on August 16, 2008, 01:47:50 pm hey guys i have removed my trunk rack to clean and paint the decklid..
and sadly lost 2 of the screws to reattach 1 of the racks.. i went to the Pontiac dealership and they said they had no more and will not ever get them again.. does anyone have some spare trunk rack screws?? or even some for sale??? let me know thanks guys. joe.. Title: Re: LF: trunk rack screws Post by: FieroBUZZ on August 16, 2008, 05:38:31 pm [nelson voice] HA_HA![/nelson voice] >:D
I must have a rack decklid here somewhere. I'll see if I do, and you're welcome to the screws. Gary Title: Re: LF: trunk rack screws Post by: FieroBUZZ on August 17, 2008, 08:29:53 am I have a damaged lid here. I can either drop it off or remove what you need, just let me know.
You could add some strips to the roof and use the extra wing as a roof wing. ;) You can pm me your number and I'll give you a call. Gary Title: Re: LF: trunk rack screws Post by: dguy on August 17, 2008, 09:28:06 am If you can't sort things out with Gary, you could always try taking one of the remaining screws on a visit to Ottawa Fastener Supply. It's a handy place... almost as much fun as Princess Auto too! ;)
Title: Re: LF: trunk rack screws Post by: FIERO-JOE on August 17, 2008, 11:22:01 am Thanks for looking..
And if you want to part with some of the rails for the trunk rack i would not say no.. im going to combine the trunk rack with a spoiler.. all in black.. so i think i may need 2 rails for the out sides to replace the rails attached to the wing on the back.. so please check and let me know how much you want for them IF anything.. thanks joe O0 Title: Re: LF: trunk rack screws Post by: FieroBUZZ on August 17, 2008, 03:54:31 pm I left the stuff somewhere in Orleans. I have to admit it all looks the same to me. :o
The rails have been out for a while but you should be able to sand them and paint them up nice. Chassis black or some other semigloss would be good. The plastic ends are not the greatest. I was thinking they could be sanded with really, really fine sandpaper (maybe 2000 grit or 000 steel wool) and finished with a plastic restorer like 'colour back'. Gary Title: Re: LF: trunk rack screws Post by: FIERO-JOE on August 17, 2008, 04:21:29 pm got them thanks,, they are great and the screws are perfect,,thanks soo much,,,
You guys are the best.... ;D ;D |