Ottawa Fiero Club Forum

Buy/Sell/Trade => Parts => Topic started by: dguy on October 14, 2006, 08:32:03 am



Title: FS: Near-OEM 14" alloy rims + tires
Post by: dguy on October 14, 2006, 08:32:03 am
(http://img223.imageshack.us/img223/8614/pa140007eg4.th.jpg) (http://img223.imageshack.us/my.php?image=pa140007eg4.jpg)

Likely from a Sunbird from the same era as the Fiero, we have four alloy rims (including tires) which we no longer need:
  • 14" diameter;
  • 6" wide;
  • +42mm offset (approximate);
  • 5x100mm bolt circle.

The rims have been stripped, media-blasted, and freshly clear coated.

They fit the front of any pre-88 Fiero just fine.  Depending upon the type of balancing weights used and the brand of struts installed, they seem to fit the rear of some pre-88s but not others.  Installing a 5mm spacer between the hub and the rim takes care of any clearance problems.

The tires are Pacemark Radial G/T.  One pair of 205/60R14 with ~4mm tread depth, one pair of 215/60R14 with ~5mm tread depth.

$25 per pair.


Title: Re: FS: Near-OEM 14" alloy rims + tires
Post by: dguy on October 16, 2006, 09:14:45 pm
Sold.