Ottawa Fiero Club Forum

Buy/Sell/Trade => Parts => Topic started by: 2ML67 on July 19, 2004, 09:06:27 pm



Title: 3800SC
Post by: 2ML67 on July 19, 2004, 09:06:27 pm
Was taliking to owner of local wreckers tonight, they just got in a 2002 Bonneville SSEI with a 3800SC if any one is interested I can get a price on it. Dan


Title: Re: 3800SC
Post by: FieroBUZZ on July 20, 2004, 05:32:01 am
B@st@rd !!!  ;D  ;D  ;D  ;D

Maybe after tomorrow's 6/49 draw........


Title: Re: 3800SC
Post by: c-l on July 20, 2004, 11:18:03 am
Dan,

You just had to tempt me just a bit more didn't you :-\

Haven't been able to get a good night sleep since I've seen YOUR MASTERPIECE on Saturday... VROOOMMMM VROOOMMMM, I like the sound of that engine so much that it is keeping me awake at night, and day dreaming all day ;)

Obviously, the "slight" performance boost offered by that engine also accounts for some of that day dreaming ;D ;D ;D

Ottawa - Toronto in 2 hours has always been a personal goal of mine ;)

With cars that have that level of performance, I've always wondered how other people could survive more that 24hours without loosing their driver's license.

Darn, if the wallet could follow the temptation, I’d purchase that engine in no time :'(


Title: Re: 3800SC
Post by: 2ML67 on July 20, 2004, 09:18:21 pm
By no means am I trying to tempt any one besides just how much actual noticeable difference could there be between the 2.8 and the 3800SC. Not to mention the large increase in fuel mileage when using the 4 speed auto tranny. Makes me wonder why I ever changed over to the 3800SC in the first place. Dan


Title: Re: 3800SC
Post by: GoFast85 on July 22, 2004, 12:11:19 pm
I would have a hard time driving the 140 hp's now that 250 plus (soon to be 350+) is available in the same frame. 


Title: Re: 3800SC
Post by: 2ML67 on July 22, 2004, 06:28:58 pm
Two points here 1) I have driven your yellow beast and I think a duke would give that bumblee a run for its money. HEE HEE
                           2) Nitrous is not a good idea, if you want to kill your self that bad find a safer way for every one else around you. Dan


Title: Re: 3800SC
Post by: 2ML67 on July 23, 2004, 08:40:38 am
Hey come on Brian this is no fun if you do not respond with some kind of smart remark. At he least argue about the power of your car or deny it looks like a bumble bee. Dan


Title: Re: 3800SC
Post by: GoFast85 on July 23, 2004, 08:50:16 am
Soem people have to work and can't afford a home internet connection and have to use the Gov't one. 
I NEED MORE POWER
Can't see why poeple put in less powerfull engines in the fiero.
350hp or bust


Title: Re: 3800SC
Post by: 2ML67 on July 23, 2004, 12:44:48 pm
If doing a V8 swap I would definetely reccomend using the newer lighter corvette engines. Keeping them fully fuel injected and bolting up to a 4T65E HD tranny from a 3800SC car. May be a bit of a wiring nightmare but well worth it in the long run.
If only using a carbed or older V8 better off going 3800SC. Then there is always the 502 chevy big block that can be used if you have enough money to do right, something like over 500 hp available there. Dan


Title: Re: 3800SC
Post by: GoFast85 on July 26, 2004, 08:45:02 am
AHHHH If I only had a garage and was retired.
You can get a 350 with twin turbo's?
Probably an issue of space in the fiero.


Title: Re: 3800SC
Post by: aaron88 on July 26, 2004, 12:20:07 pm
If you're going to go that far you might as well get an Ultima GTR.

Aaron

.


Title: Re: 3800SC
Post by: GoFast85 on July 26, 2004, 12:27:18 pm
insurance would probable kill ya.
---
Try
$500 fiero
10,000 engine
$4,000 turbo
And lots of time



Title: Re: 3800SC
Post by: dguy on July 30, 2004, 09:56:44 am
Well to break away from my comfortable, sunny view of the Atlantic Ocean for a moment, if you have the chance Dan can you please find out what the yard would want for the motor & engine compartment-side wiring harness?

I don't need any of the other "usual" electronic baggage.  Doing the aftermarket PCM thing...


Title: Re: 3800SC
Post by: 2ML67 on July 30, 2004, 11:34:43 am
Don would you be needing the tranny as well or just the engine and harness. Dan


Title: Re: 3800SC
Post by: 2ML67 on July 30, 2004, 01:04:23 pm
Checked with Hothc's they have two 3800SC engines one out of a 1999 Buick Park Avenue Ultra with 87,000km on it and the other out of the 2002 Bonneville SSEI with 52,000km on it. Price same for both I can have pick of which one I want. Engine with tensioners and pulleys still on and wiring harness is $2,500 + taxes. They probably wont last long if you are interested let me know and I can put you in contact with them. Dan


Title: Re: 3800SC
Post by: dguy on August 03, 2004, 09:43:39 am
Damn you're fast.  :)

I must've had too much sun, gin, or something when I replied earlier.  After getting back home I was reminded of how much play money isn't available at the moment.   :'(

Thanks for checking it out though!