Ottawa Fiero Club Forum

Buy/Sell/Trade => Parts => Topic started by: Dan on June 14, 2012, 10:40:53 am



Title: Cleaning out some parts
Post by: Dan on June 14, 2012, 10:40:53 am
Found some more parts while cleaning out my garage and shed.
I have one complete set of front inner and outer tie rods still in the box from the Fiero store for an 84 to 87 Fiero along with new front bearings also still new in the box.
One Sunbird Turbo gauge cluster intact and one Tach from a turbo cluster.
Very good condition grey dash, one complete factory sub woofer set up with the over head console piece plus much more. Dan


Title: Re: Cleaning out some parts
Post by: Dan on June 23, 2012, 02:13:55 pm
Found two more sets of the Sunbird turbo hood vents, one 120 mph back lit gauge cluster, one 140 km/h back lit cluster and a decent set of upper seats in gray just the material.
Also have one good FWD Getrag from a late 90's W body and one F23 from a 2000 Cavalier with the Fiero bell housing. A set of pedals for a manual tranny with the steel clutch pedal and both 4 and 5 speed shifters. Will add more as I find parts.
All parts are best reasonable offer. Dan


Title: Re: Cleaning out some parts
Post by: aaron88 on June 23, 2012, 03:11:40 pm
I'll take the pedals.  I need to have a second set for the track.  PM me the price and I'll work something out to pick them up next time I'm going to Augdensburg.

Aaron

.
Edit:  I'll also take the five speed shifter.


Title: Re: Cleaning out some parts
Post by: fiero_fighter on June 23, 2012, 10:32:19 pm
Dan, could you let me know what your asking for the original sub/ overhead setup?  Was told it was an original option in my car but the previous owner removed it prior to the sale.


Title: Re: Cleaning out some parts
Post by: c-l on June 23, 2012, 10:57:48 pm
Interested in the F23
Is the 5 speed shifter proper for the F23?


Title: Re: Cleaning out some parts
Post by: aaron88 on June 25, 2012, 01:42:08 am
Interested in the F23
Is the 5 speed shifter proper for the F23?

The shifter will work if you modify the links and brackets on the transmission. and get custom cables.

Soon I'll be developing brackets that use stock cables though.

Aaron

.


Title: Re: Cleaning out some parts
Post by: c-l on June 25, 2012, 08:51:01 am
Interested in the F23
Is the 5 speed shifter proper for the F23?

The shifter will work if you modify the links and brackets on the transmission. and get custom cables.

Soon I'll be developing brackets that use stock cables though.

Aaron

.

I was just about to PM you to find out if the development was done yet, I will most likely not be doing the swap this year as my priority is to complete Fred's car rebuild, then a COMPLETE reassembly of my wife's Indy... then possibly a 4T60 conversion on Fred's Auto, then the F23 (either in my SC or in Michaël's 86 GT) and finally, do the other car's F23 conversion.

Keep me posted  >:D

.



Title: Re: Cleaning out some parts
Post by: Dan on June 27, 2012, 06:43:00 pm
Also found a good shape rear Aero bumper with the smooth molding and a good front Aero bumper with the grooved but that can easily be changed on the fronts. Dan


Title: Re: Cleaning out some parts
Post by: Dan on July 03, 2012, 04:07:31 pm
Add very good shape sunroof tracks and an 88 V6 rad in near mint shape.
need to make room and get these parts moving plus the lawyer still wants his final payment so that is basically where the funds will all be going.


Title: Re: Cleaning out some parts
Post by: Dan on July 04, 2012, 11:03:33 am
Also found a set of dark grey upper seat skins in good shape other then one stain that should wash out. Dan


Title: Re: Cleaning out some parts
Post by: lacelles on July 27, 2012, 10:37:57 pm
Dan, could you let me know what your asking for the original sub/ overhead setup?  Was told it was an original option in my car but the previous owner removed it prior to the sale.

If you are talking about my 3800SC fiero, no it was not an option in that (my) fiero.  I had bought a complete kit thinking of adding it to the fiero.


Title: Re: Cleaning out some parts
Post by: ClubFed on September 28, 2012, 03:57:28 pm
How much are you asking for the F23?

the front inner and out tie rods?

front bearing / races?



Title: Re: Cleaning out some parts
Post by: ClubFed on September 29, 2012, 07:56:18 pm
Ok, everything above except the F23. I just pulled one at Kenny's today.



Title: Re: Cleaning out some parts
Post by: coady on January 24, 2013, 07:04:53 pm
hi
did the complete factory sub woofer set up with the over head console piece plus much more sell?
thanks