Welcome, Guest. Please login or register.
Did you miss your activation email?
May 13, 2024, 12:57:49 am
Home Help Search Login Register

Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: Cleaning out garage « previous next »
Pages: [1] Go Down Print
Author Topic: Cleaning out garage  (Read 2451 times)
2ML67
Guest
« on: July 07, 2009, 08:35:32 pm »

I am cleaning out my garage to make room and want to sell off some stuff.
I have three manual trannies one is an 86 3:65 4 speed, second is an 88 4 cyl Isuzu 5 speed and third is an 87 V6 Getrag 5 speed. The Getrag needs a new input shaft sleeve for the throw out bearing and the other two are in good working condition.
Also have one 99 3800SC engine with 118,000 km on it, one GT fast back deck lid with out the wing, one complete set of back lit 180km/h gauges with the matching aux gauges and the wiring pig tail for the aux gauges.
Have two of the Sunbird turbo tachs out of their pods as well as lots of other parts. Dan
Logged
Fred
Fiero Owner
**
Offline Offline

Posts: 93


« Reply #1 on: July 07, 2009, 09:09:43 pm »

PM Sent for price!  Wink

Fred
Logged

Pontiac Fiero GT 1987
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #2 on: July 08, 2009, 12:05:36 am »

Dan;

If you have any combination valves I'll take up to three of them.  Believe it or not they are really nice pieces and are no longer found in any newer cars, but can be used to circumvent any ABS system if used in combination with a adjustable proportioning system such as mine.

Also if you have a spare brake booster, I need one to take apart.  I'd rather do it on a spare the first time to make sure the brakes will engage the way I want.  I want to adjust it to make the brakes engage hard immediately.

Let me know.

Aaron

.
Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
2ML67
Guest
« Reply #3 on: July 08, 2009, 07:41:20 pm »

Have two Fiero brake proportioning valves hanging on the wall, also found a factory GT rear wing but one of the wing stands is not in perfect shape.
Also found power mirror wiring, three power mirror switches and a driver's side power mirror and I still have to pull it down from the rafters to check but there is one front aero bumper up there and the rear parts of a Kamio kit or what ever you call it that bolts to the bottom of the 84 style bumpers.
Found one 5 speed shifter and two sets of Isuzu shifter cables and one Fiero rad fan with the housing around it from an A/C car. Dan
Logged
Fred
Fiero Owner
**
Offline Offline

Posts: 93


« Reply #4 on: July 08, 2009, 07:46:15 pm »

PM sent again!  Cheesy

Fred
Logged

Pontiac Fiero GT 1987
Bradtholomew
Guest
« Reply #5 on: July 08, 2009, 08:00:17 pm »

Sent a PM also...
Logged
2ML67
Guest
« Reply #6 on: July 08, 2009, 08:00:40 pm »

PM's are slow on this site, so it is not there yet. Dan
Logged
Bradtholomew
Guest
« Reply #7 on: July 08, 2009, 08:06:58 pm »

PM's are slow on this site, so it is not there yet. Dan

haha, I lied, I was about to start typing. 
Logged
Fred
Fiero Owner
**
Offline Offline

Posts: 93


« Reply #8 on: July 08, 2009, 09:47:58 pm »

Me too...  Roll Eyes

 Grin

Fred
Logged

Pontiac Fiero GT 1987
2ML67
Guest
« Reply #9 on: July 09, 2009, 07:25:10 pm »

Also found one rear Aero style bumper with the ribbed molding. Dan
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision


« Reply #10 on: July 09, 2009, 11:39:44 pm »

Dan;

Please hold those valves for me.  I'm in no rush, I don't even have an aplication right now.  When we meet we'll make an exchange.  If you need cash I'll send it.  Combo valve I can get latter.

Thanks,

Aaron

.
Logged

Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
2ML67
Guest
« Reply #11 on: July 15, 2009, 06:56:36 pm »

I must not have been paying much attention when I moved all the parts because I found a spare set of fast back side vents and an extra set of fast back tail lights in the rafters. Dan
Logged
indypacecar
Guest
« Reply #12 on: July 16, 2009, 09:44:32 pm »

I m interested in the tail lights and maybe the vents.  Do  you still have a fastback clip ??   for sale???  Thanks Sean
Logged
Gizmo
FORUM MASTER
Moving UP!
*****
Offline Offline

Posts: 471



« Reply #13 on: July 17, 2009, 12:24:43 pm »

pm sent  Afro
Logged
Pages: [1] Go Up Print 
Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: Cleaning out garage « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!